• No computer required; use existing control system or remote power switches
• Built-in 2-stage surge suppression with notification
• 9 outlets, 1 front, 8 rear
• Either 2 or 6 contact-closure controlled outlets on rear, depending on model
• Settings for momentary or maintained control style, normally opened or normally closed
• LED Power Indicators
• Illuminated power switch

The PD-915RV-RN rackmount power distribution unit with local and remote notification of surge suppression status is equipped with 8 rear outlets and one front outlet. Two front LED status indicators display the level of protection provided by the unit's 2 stage surge and spike suppression. The PD-915RV-RN provides notification of surge suppression status to any customer supplied monitoring device. The 9" depth provides easy access to the vertically oriented, 15 amp rear outlets, which have been spaced to accommodate plug-in power supplies. Clean ground suge suppressor design will not pass noise contamination to the ground. Two USB ports on back panel accommodate LT-GN gooseneck LED light for additional illumination of rack. This unit features a generous 9 foot cord and an illuminated combination power switch/circuit breaker. Finished in a durable black powder coat and occupies one rackspace.

UL Standard: 1419

The PD-915R rackmount power distribution unit is equipped with 8 rear outlets, and one front outlet. Standard equipment includes surge and spike protection, EMI filtering, and a 9' cord. A generous 9" depth offers easy access to the 15 amp rear panel outlets, which are solidly mounted on yokes to eliminate deflection. An illuminated combination power switch/ circuit breaker is located on the front panel (PD-915R, PD-915RC-20 only). UL listed in the US and Canada. Occupies one rackspace. The PD-915RC-20 shares all of the same features as the PD-915R, but boasts a generous 20' cord.

UL Standard: 1419

The PD-920R rackmount power distribution unit is equipped with 8 circuit breaker protected rear outlets (NEMA 5-20R), and one front outlet (NEMA 5-15R). Standard equipment includes surge and spike protection that utilize a clean line to neutral that does not pass noise contamination to ground (PD-920R-NS does not have this protection), EMI filtering, and a 9' cord. A generous 9" depth offers easy access to the 20 amp rear panel outlets, which are solidly mounted on yokes to eliminate deflection. An illuminated combination power switch/circuit breaker is located on the front panel. UL listed in the US and Canada. Occupies one rackspace. The PD-920RC-20 shares all of the same features as the PD-920R, but boasts a generous 20' cord.

UL Standard: 1419

These rackmount power sequencing power distribution units provide 6-step sequencing to 6 rear outlets. Adjustable start time delay allows daisy-chaining of up to 3 sequencers to act as a single unit. Sequencing intervals are facilitated by front panel controls, while all sequencing activity is monitored through a series of LED indicators. A remote up/down sequencing connection block is located on the rear panel, which facilitates daisy-chaining and remote control. The PDS Series power distribution units measure 8-3/4" deep and come with a 9' cord. An illuminated combination power switch/circuit breaker is located on the front panel. UL Listed in the US and Canada. Occupies one rackspace.

  #96-940 Download or view PDF file