Hardware

All 10-32 threaded rackscrews feature a self-guiding pilot point to simplify installation

NEW Premium Rack Screws

Premium rack screws provide the best bit engagement in the
industry. HG hardware features salt spray resistant plating that slows rust build-up and is ideal for marine and high-humidity installations. HM hardware features an attractive black matte finish. Both types are truss-head hardware, 10-32 threaded, 3/4 ” long with pre-installed washers and self-guiding pilot points.

Part #	Qty	Finish
HG	100 pc.	salt spray resistant ,black gloss
HG500	500 pc. in a reusable jar	salt spray resistant ,black gloss
HM	100 pc.	black matte
HM500	500 pc. in a reusable jar	black matte

HG hardware is recommended
for use in humid
and marine
applications

	HG	HM

	self-guided pilot point

Standard Rack Screws

Standard w” long rack screws with 10-32 threads feature self-guiding pilot points. HP Series truss head screws provide a clean, modern appearance and fit under optional trim strips (see pg. 120) for the most attractive finish. HW Series trim-head screws feature an older, classic appearance. Includes factory-installed nylon washer.

Black Part #	Silver Part #	Head	Quantity
HP500	--	truss-head	500 pc. in a reusable jar
HP	CHP	truss-head	100 pc. in a poly bag
HPS	--	truss-head	25 pc. in a poly bag
HW500	--	trim-head	500 pc. in a reusable jar
HPSMP	--	trim-head	master pack of 25 HPS


HP	CHP	HW500

Security Rack Screws

Security screws are the ideal way to keep people from tampering with rackmounted equipment. The highest security patented Guardian Series™ hardware is unique to Middle Atlantic Products and features a square post drive that cannot be found elsewhere. All screws are 10-32 by 3/4 ” and include factory-installed black nylon washer and black finish.

Part #	Qty	Bit Part #	Description
HSK	100 pc. screws	SPBIT	Highest Security patented square post drive bit to drive HSK Guardian Series™ security screws
HTX	50 pc. screws	TBIT	star post bit to drive HTX security screws
HS	100 pc. screws	SBIT	square drive bit to drive HS security screws

HSK Guardian Series™ security hardware .


SPBIT	TBIT	SBIT

Cable Friendly Short Rack Screws

Cable friendly HPQ Series screws are 3/8” long with 10-32 threads and feature a rounded end to allow wires to be dressed inside front rackrail without chafing. Featuring an attractive Phillips truss head, finished in black.

Part #	Quantity
HPQ500	500 pc. in a reuseable jar
HPQ	100 pc.

HPQ

Cage Nut Hardware

Cage nuts fit our WRK, MRK, and DRK cage-nut style rackrail and are available to fit 10-32 and 6mm rack screws to accommodate slide out servers.

Part #	Description
CN6MM-100	100 pc. 6mm cage nuts
CN1032-50	50 pc. 10-32 cage nuts

CN1032-50

CN6MM-100

12-24 and 6MM Rack Screws

Primarily used in telecommunications and data, these 5/8” long 12-24 and 6MM
threaded screws are heat-treated to prevent head stripping. Finished in black, includes nylon washers.

Part #	Description
HP-24	100 pc. (12-24) thread
HP24-500	500 pc. (12-24) thread in a reusable jar
HP-6MM	100 pc. 6mm phillips head rackscrews


HP-6MM


HP-24

Shoulder Washers

When used in conjunction with the pre-installed washers supplied on our screws, these black nylon shoulder washers will electrically isolate the equipment from the rackrails to help prevent ground loops. 100 piece count. NOTE: not for use with HPQ, HP-6MM and HP-24 screws

Part #	Quantity
SW	100 pc.